900 000kcal high power waste oil burner
ps:must work with external air compressor
smallest capacity is 1.2-1.5cbm/min
1.misfunction and solution:
mal button lights,quick flicker turns to slowly flicker.
Press reset button to see if burner is back to work.If not,take off the photo cell and wipe.
Mal button is alway light,reset button can’t press.
In this case,power off and connect the power again.
It is a normal misfunction,because new burner,there is no oil in oil pump and filter.Pump can’t supply oil within 2 mins,oil float gives message to print board,to shut down the burner for protection.
Heat button is lighting,then light the mal button.
There is too much water in the oil.
use the valve in the bottom of the small tank to leak water.
Stilling oil for a night,let me water and oil seperate.
Ignition rod is striking fire,but no fire.
Use the tool to remove the nozzle,check if it has been blocked,change the rubber pad too.
The tool and rubber pads are also with the burner,we send you for this situation.
If you meet other problem,contact me first .
2.Have you improved and innovated your product?
As a factory,we improve and innovate all the time,we take customers requirment seriously.For example:
We insulate copper in demand of NZ customer need.
We change the print board’s programme to reach 30s purge.some countries have demand for that.
We change the manual air flap to automatic system.To low down the noise.
We use one air compressor for two or three air solenoid system,to reduce the cost for customer.
If you have any requirement for burner,please let me know.
3.Customers have their own oil system,no need of oil pump system.Is that ok?
Yes,it’s ok.Please let me know first.To see if we have to change the print board accordingly.
4.Do customers need to prepare the pre-filer?
No.We have it with the burner.If you have your own ideas,then it’s ok.
5.Comparing waste oil burner within compressor and some diesel modified burner,what’s the difference?
We are true waste oil system,differ from waste oil burner within compressor and diesel modifed burner.
6.I am not so familiar about waste oil burner,which type should I choose?
It’s ok.Contact us,we will guide you the best burner.
7.Is necessary the burner working with a compressor?
Yes.It is.Because the simple principle is high pressure atomizing.
8.what’s the air compressor would match your burner&heater?
KV-03,KV-05,KV-10,KV-20,KV-30 matches around 0.3-0.5cbm/min(5-9L/s) ac
KV-50,KV-60 matches around 0.7-1cbm/min(11-17L/s) ac
KV-90,KV-120 matches around 1.2-1.5cbm/min(20-25L/s) ac
KVH-1000,KVH-2000,KVH-5000 and KVH-6000 matches around 0.3-0.5cbm/min(5-9L/s) ac
9.Can I pay by credit card instead of going to bank?
Yes,it’s ok.Just let us know.
Contact name: Helen JiangID:cn1513245264Tel/whatsapp/wechat: 86-130 1251 3355Fax: 0532-68876247
email:helenjiang_sales1@ kingweienergy.com(no blank after @)
linkedin: https://cn.linkedin.com/in/waste-oil-burner-supplier-bb4770bafacebook: https://www.facebook.com/wasteoilburnersupplieryoutube: https://www.youtube.com/channel/UCrIv63Y1ri9tFY_g8DzKO4Qhttps://www.youtube.com/channel/UCd2DtCB7ma4BzUwCRPVs4owshop on alibaba:Http://jinweijieneng.en.alibaba.com/
office&factory address:Wangsha Road Chengyang District Qingdao Shandong China
(Liter per hour)